Johann Stoltz Posted October 14, 2014 Share Posted October 14, 2014 Hi Guys, Recently did my ARTS and Wiring rules at PEER and applied for a SA Electrical licence. Anyone know how i can convert it to a QLD one, i've heard that there is some red tape on this. Thanks Stolla Link to comment Share on other sites More sharing options...
blossom Posted October 16, 2014 Share Posted October 16, 2014 Bump Link to comment Share on other sites More sharing options...
Johann Stoltz Posted November 3, 2014 Author Share Posted November 3, 2014 BUMP ?? again... maybe lucky this time. Link to comment Share on other sites More sharing options...
sharron pickett Posted November 5, 2014 Share Posted November 5, 2014 Hi, I did the same thing about 4 years ago, flew out to SA and got my licence there. I applied for the Qld licence a short while later, and had no problems. I used a friends address on the GC. Moving forward 3 1/2 years, we finally moved to Qld. Got a job and everything was sweet until.......I applied for my contractor licence. They wrote back and asked for evidence of gap training because I had done the SA route. So, a weeks course at skillstech, (another $900), 2 written exams and a practical! I've got to say though, I needed the refresher and looking back, it was a tough week 8am to 6pm Mon-Fri but worth it. I was told this course can be spread out over a longer period if you have time on your side, you would need to contact Skillstech about that though. Hope this is useful. Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.