Toinette

Hi Azooz, No he didn't attempt the technical interview again after he failed it the 1st time. He actually went and got his Electrical red seal certificate, so now we can apply for skills assessment for the right occupation and he doesn't have to do a technical interview again he will only be assessed with his paperwork and years working experience.

Hi Can i ask what well known institute in Australia did your RPL for the electronics Trade worker?

good luck, let me know what the outcome is

if you have a sub qualification in Electronics and communication then you should`ve applied for Anzsco 342313 Electronics Equipment Trades Worker i`m sure you will pass that with ease. Below is unit codes in each section they ask in the Technical interview, but unfortunately there is no study material for this to prepare for the Technical interview. I`ve researched and send mails asking for study material for this but no one can help me. They all say you have to go and study in order to get the study material and my husband cant go and study because he must retake the technical interview in about 10 months. COMMON UNITS UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications* UEENEEK142A Apply environmentally and sustainable procedures in the energy sector UEENEEC021B Participate in electronics and communications work and competency development activities UEENEEE137A Document and apply measures to control OHS risks associated with electro technology work* ELECTRICAL COMPONENT AND CIRCUIT FUNDAMENTALS UEENEEE104A Solve problems in d.c. circuits* UEENEEE102A Fabricate, assemble and dismantle utilities industry components* LINEAR AND DIGITAL ELECTRONIC CIRCUITS UEENEEH102A Repairs basic electronic apparatus faults by replacement of components UEENEEH139A Troubleshoot basic amplifier circuits* UEENEEH113A Troubleshoot amplifiers in an electronic apparatus* UEENEEH112A Troubleshoot digital sub-systems* UEENEEH111A Troubleshoot single phase input d.c. power supplies* UEENEEH138A Fault find and repair complex power supplies* UEENEEH114A Troubleshoot resonance circuits in an electronic apparatus* COMPUTER AND NETWORK ASSEMBLY, INSTALLATION AND CONFIGURATION UEENEEE105A Fix and secure electrotechnology equipment* UEENEED102A Assemble, set-up and test computing devices* UEENEED146A Set up and configure basic local area network (LAN)* UEENEED104A Use engineering applications software on personal computers* UEENEEH166A Troubleshoot microcontroller based hardware systems COMMUNICATION SYSTEM INSTALLATION AND MODIFICATION UEENEEF102A Install and maintain cabling for multiple access to telecommunication services UEENEEH146A Solve fundamental electronic communication system problems* NOTE: * indicates that a unit requires a pre-requisite/s. Regards

if you apply through TRA for 342311 who does the technical interview then? Our agent said we cant apply for 342311 because my husband does not have the necessary qualification for it. He started this when he left school and only A+ was required back then. What qualification do you have? Are you doing everything yourself or going through an agent? We don`t want 190 or 489 we want PR from the beginning just makes everything so much easier. Its difficult to get a sponsorship for a photocopier technician no one does sponsors in this field. Where are you from and when are you guys planning on moving to Australia? Regards

Hi, unfortunately he didn't pass the Technical interview, we didn't know that the technical interview wont be about printers we were under the impression that it will be all about printers till about a week before the interview. They ask everything based on electronics except for printers. I have a list of what you require for the technical interview. He can now reapply to take the technical interview on the points that he failed, but its difficult to get info on what exactly he must study now to make sure he pass the interview. When are you doing the technical interview? Regards Toinette

this is the reply from the agent when i told him none of the items on the list that he will be questioned about in the technical interview relates to his occupation. "In Eben’s Technical interview Vetassess will be asking questions that align with the items in the attached Fact Sheet related to Eben’s occupation. Vetassess only invite those to the technical interview once they have passed the stage one pathway. The purpose of the stage one is to confirm the candidate has been working in the occupation claimed – Vetassess believe this to be the case. I can only advise that Eben attends the interview and hopefully does well. The only other alternative would be to cancel the interview and then request a refund – I am not confident that the refund would be granted. Please let me know your thoughts.?

That is correct, the agent applied for the skill closest to his occupation. I just need to know if this happened before and if its still possible for him to pass his Technical interview.

Hi, I would like like to know if there is anyone that did the Electronic Equipment Trades Worker (342313) technical interview that is actually in the photocopier industry? My husband is a photocopier service technician and must do his technical interview on the 11th, i just need to know how do you do the interview if none of the below is part of his job description.

Hi I would like to know if there is anyone that did their technical interview for an Electronic Equipment Trades Worker that is in the printer business (technical service engineer) (fix printers).