andydownunder

Hi Matthew, The maximum allowable resistance between earth terminal and frame (continuity test) is 0.5 ohm in Western Australia. The minimum allowable resistance between L and N to earth (IR test) is 1 Mega ohm. I hope that helps. Regards, Andy

Thank you Skyba for your input I'll look into it. [h=1][/h]

Hi Ian, Do you may remember what you wrote on the first page of the practical experience summary document regarding: Manage Risks and Hazards / Minimise material usage / Apply energy reduction methods / Manage the recycling and safe disposal of materials used in electrical installation wiring work I have to state the dates, country where the experience occurred and describe the experience in each area. It would be great if you could point me in the right direction. Cheers, Andy

Thanks so much Ian that helps a lot!!!

Hi there, I'm preparing for the vetassess electrical practical assessment and was wondering if somebody could clarify some of my questions. 1. Does anyone know if the disconnection / re-connection procedure in the Vetassess guide booklet has to be followed step by step? When I read through the disconnection process I recognised that the protective device should be isolated in step 16 and not at the beginning. Wouldn't it be safer to de-energise the equipment conductors first and preform all measurements afterwards? 2. What are your experience with the PEES document? Did you fill in as much as possible or only the basics? I would be grateful to hear from anyone who may be able to help! Cheers, Andy